Hanging Wallpaper
Simple step by step projects for maximum effect with minimum effort. |
|
1. Measuring up
Use pencil to mark the height require and align it with a steel ruler. |
|
|
2. Cutting the drop
Measure out the first length adding 15 cm (6 in) extra to allow for trimming at top and bottom. |
|
|
3. Matching the pattern
Check the next length against the first one to match the pattern before cutting. |
|
|
4. Pasting
Apply paste with brush or roller until the edges |
|
|
5. Folding the paper
Fold the pasted sides together like "S" sharp, easy carry paper to wall. |
|
|
6. Scrapering or brushing on the wall
Use a wallpaper brush or scraper press paper against the wall. Brush down the centre, then out to the edges. |
|
|
7. Trimming the edges and matching the pattern
Trip it with a craft knife. Hang the next drop, matching the pattern exactly. Wipe off paste with a damp sponge. |
|
|
8. Turning a corner
Hang the paper to this line, adding 1/2 inch for internal paper. Overlapping the next piece with matching pattern. |
|
|
9. Papering around switch and socket
Paper straight over a switch or socket, using a craft knife to make diagonal cuts. Press the flaps back into position and trim the edges. Wipe off paste with a damp sponge. |
|
Basic: Wallpapering Tools
 |
